Solar panels turn daylight into electricity using thin layers of silicon, with no moving parts and no fuel. They work best in bright, direct sun but still generate under cloud, just less. In the South East, each kW of panels typically produces around 850 to 1,000 kWh a year, and roughly two thirds of that arrives between April and September.

Photovoltaics in plain English

Each panel is made up of dozens of cells built from two layers of specially treated silicon. When light strikes a cell, its energy knocks electrons loose, and the way the two layers are made pushes those electrons in one direction. Moving electrons are an electric current. This is the photovoltaic effect, which is why the industry calls solar electricity PV.

The current comes out as direct current (DC), the same kind a battery produces. Your home and the grid run on alternating current (AC), so the panels on their own cannot power anything in the house. That is the job of the inverter, which we come to below.

kW versus kWh, and what a system produces

Two units cause most of the confusion. A kilowatt (kW) is a rate of power, like the speed of a car. A kilowatt hour (kWh) is an amount of energy, like the distance travelled. A 3 kW kettle running for two minutes uses 3 × (2 ÷ 60) = 0.1 kWh.

A solar system is described by its peak rating in kW, sometimes written kWp. That is what it produces under standard laboratory test conditions, and on a real roof it rarely reaches it. What matters is the kWh it produces over a year. Take a 4 kW system on a south-facing roof, producing 950 kWh per kW, or 3,800 kWh a year. Based on the European Commission's PVGIS model for south London:

  • June: about 12% of the year's output, so 3,800 × 0.12 = 456 kWh, or around 15 kWh a day.
  • December: about 3.6%, so 3,800 × 0.036 = 137 kWh, or around 4.4 kWh a day.

A December day therefore produces less than a third of a June day. This seasonal swing is the most important thing to understand before you buy. It is why a battery or heat pump system has to be designed with winter in mind, and why our guide on whether a battery is worth it looks at both halves of the year.

Panels, inverters, optimisers and microinverters

A home system has a handful of main parts:

  • Panels: generate DC electricity. Modern domestic panels are typically rated at around 400 to 440 W each and should last 25 years or more.
  • Inverter: converts DC to AC for your home and the grid. A hybrid inverter can also charge and discharge a battery. Inverters work harder than panels and usually need replacing once in a system's life, often after around 10 to 15 years.
  • Optimisers: small units behind each panel that let it work at its own best point, so shade or dirt on one panel does not drag down the rest. They work alongside a central inverter.
  • Microinverters: a small inverter on each panel, converting to AC on the roof. They deal with shade in a similar way and remove the central inverter, but put more electronics on the roof, where a failed unit is harder to reach.

Which suits you depends mostly on shade and roof layout. On a simple, unshaded south roof, a good string inverter (one central inverter fed by panels wired in series) is efficient and easy to service. On roofs broken up by chimneys, dormers or several orientations, panel-level electronics usually earn their cost.

Whatever the set-up, your home uses the solar power first. Any surplus flows out to the grid through your meter, and you can be paid for it under the Smart Export Guarantee, which we register every system for.

Cloudy days, cool days and hot days

Panels respond to light, not heat. Under bright but overcast skies they still produce a useful share of their rated output, while on a heavy, grey winter day that can drop to something like 10 to 25% of what they manage in full sun. The UK's changeable weather is already built into every annual yield estimate, including the figures above, so cloud does not come as a surprise to a well-modelled system.

Heat works against panels. Their efficiency falls as the cells warm up, typically by around 0.3 to 0.4% for every degree above 25°C at the cell. On a still July afternoon a roof-mounted panel can reach 50°C, which costs it around 8% of its output. That is why a cool, bright spring day with a breeze often gives some of the best hourly output of the year, even though summer produces more in total because the days are so much longer.

Monitoring, and what happens in a power cut

Every system we fit comes with monitoring, usually an app linked to the inverter that shows generation, household use, battery level and export as they happen. It is the easiest way to catch a fault, because a sudden drop on a sunny day stands out immediately, and checking it once a month is enough for most people.

Many people are surprised that a standard solar system switches off in a power cut, even on a sunny day. When the grid goes down, the inverter must disconnect within a fraction of a second so it cannot feed power into cables that engineers may be working on. This protection is a condition of connecting to the network, not a fault.

If backup matters to you, it is possible. A hybrid inverter with a battery and a dedicated backup circuit (sometimes called EPS, for emergency power supply) can keep chosen circuits, such as the fridge, some lights and the router, running from the battery. It adds cost and wiring work, so it is worth deciding at the design stage rather than afterwards.

Where to go from here

Solar is simple technology: light in, electricity out, with an inverter in between. What decides whether it pays is how much your roof produces and how much of that you use yourself. A good next read is our guide to whether your roof is suitable.

When you want real figures, take a look at solar for your home and ask us for a survey. We model your roof and usage before quoting, so the number is yours, not an average.