The Smart Export Guarantee (SEG) is the government scheme that pays you for electricity your solar panels send to the grid. Larger energy suppliers must offer at least one export tariff, but they set their own rates, which at the time of writing range from about 1p to 20p per kilowatt hour (kWh). To qualify, you need an MCS-certified system and a meter that records what you export.

How the Smart Export Guarantee works

Solar panels often produce more electricity than a home is using at that moment, particularly around midday in summer. That surplus flows out through your meter into the local network, and the SEG makes sure you are paid for it.

The scheme started on 1 January 2020. It is overseen by Ofgem, the energy regulator, and has a few simple rules:

  • Who must offer it: any electricity supplier with at least 150,000 domestic customers must offer an SEG tariff. Smaller suppliers can choose to.
  • What it pays: a rate per kWh for metered export. Suppliers set the rate, and the main rule is that it must always be above zero.
  • What it covers: solar panels, wind, hydro and anaerobic digestion up to 5 MW, and micro combined heat and power up to 50 kW, in Great Britain. That includes homes and businesses.

Who qualifies for SEG payments

Most new home solar systems qualify, provided a few boxes are ticked:

  • MCS certification: the system must be fitted by an MCS-certified installer using certified products. MCS is the Microgeneration Certification Scheme, the industry standard for small-scale renewables. Suppliers usually ask for your MCS certificate when you apply.
  • A meter that records export: usually a smart meter that can take half-hourly readings. Your export connection also needs its own reference number, called an export MPAN (meter point administration number), which your supplier sets up.
  • No Feed-in Tariff export payments: an installation already paid for its export under the old Feed-in Tariff cannot also claim SEG payments for the same electricity.

If you have a battery, some suppliers ask how it is set up, because SEG pays for electricity generated by your renewable system rather than power bought from the grid and sold back.

How SEG rates differ between suppliers and tariffs

Because each supplier sets its own rate, the gap between the best and worst tariffs is wide. At the time of writing, the market falls roughly into four groups:

  • Standalone tariffs: open to anyone, whoever supplies your electricity. Most pay between about 1p and 6p per kWh.
  • Tariffs linked to your import supply: pay around 12p to 20p per kWh, but only if you also buy your electricity from the same supplier.
  • Fixed or variable: fixed tariffs hold the rate for a set term, often 12 months. Variable tariffs can be changed with notice.
  • Time-of-use and battery tariffs: pay different rates at different times of day, with the highest rates in the early evening. They suit homes with a battery that can export at peak times.

The highest export rate is not always the best deal. If a supplier's export tariff requires you to take an import tariff that costs more per unit, what you gain on exports can be lost on the electricity you buy. Compare the two together.

You can apply to any supplier that offers an SEG tariff, and it does not have to be the company that sells you electricity. Switching later is allowed. Check any exit terms on a fixed tariff, and have your MCS certificate and meter details ready for the new application.

What a typical home earns from export

Export income depends on how much you send to the grid and the rate you are paid. Here is a worked example for a home with ten 430 W panels, which is a 4.3 kW system.

  • Yearly generation: at around 900 kWh per kW in the Southeast, 4.3 × 900 = 3,870 kWh.
  • Export: the household is out most weekdays and uses half of that directly, so it exports about 1,935 kWh.
  • At 3p per kWh: 1,935 × £0.03 = £58 a year.
  • At 12p per kWh: 1,935 × £0.12 = £232 a year.
  • At 15p per kWh: 1,935 × £0.15 = £290 a year.
  • At 20p per kWh: 1,935 × £0.20 = £387 a year.

Choosing a good tariff is worth over £300 a year here. Even so, the 1,935 kWh the household uses itself saves it about £509 at the current 26.32p price cap unit rate, which is more than the best export tariff earns. Our guide to how much solar will actually save you explains that balance.

Export matters more for businesses with a big midday surplus. At an artisan bakery in Peckham, where the ovens run from 4am, the afternoon surplus from a 24 kW array earned £1,140 in export payments in its first year, more than the bakery's annual standing charges.

On tax, HMRC does not charge income tax on export payments from a home system that you intend to generate no more than about 20% above what the house uses. Business export income is taxable, so speak to your accountant.

How SEG differs from the old Feed-in Tariff

The Feed-in Tariff (FIT) closed to new applicants on 31 March 2019. If you have an older system, you may still be on it.

  • What it paid: FIT paid a generation tariff on every kWh your panels produced, plus an export tariff. SEG pays only for export.
  • How export was measured: most FIT homes without an export meter were paid on deemed export, an assumed 50% of generation. SEG pays only for metered export.
  • Who set the rate: FIT rates were set by government, fixed for 20 or 25 years and adjusted each year for inflation. SEG rates are set by suppliers and can change.

Existing FIT customers keep their payments until their term ends. If you are on FIT and want to add panels or a battery, check with your FIT supplier first, as changes can affect your payments.

Getting your system registered for export payments

Registration is straightforward once your system is commissioned and your MCS certificate is issued. Choose a tariff, and apply to the supplier with your certificate and meter details. The supplier will confirm when payments begin and how they are made.

When we install a system we register it for the Smart Export Guarantee, so payments start as soon as you are switched on. Our guide to what happens on installation day covers the steps from survey to switch-on, and our installation page explains how we work. If you would like help choosing an export tariff for your system, get in touch.