Family home with heat pump, Sevenoaks

Home

Family home with heat pump, Sevenoaks

A 1990s detached house switching from oil heating to an air-source heat pump. We designed a 12 kW array and 13.5 kWh battery around the pump's winter demand, not just the summer sunshine.

At a glance

System size
12 kW
Bill saving
68%
Annual generation
10,900 kWh
Payback
7.4 years
Battery
13.5 kWh
CO2 saved
2.3 t / year
Install time
3 days
Location
Sevenoaks, Kent

The brief

The Lindqvists were replacing an ageing oil boiler with an air-source heat pump and were worried that their electricity bill would simply replace their oil bill. They asked us to design a solar and battery system that would make the heat pump affordable through winter, not just look good in July.

The house has a large south-facing hipped roof and a detached double garage.

The system

We used both the main roof and the garage to reach 12 kW, which is more than a typical home needs but is sized to the heat pump's shoulder-season demand. The 13.5 kWh battery charges on a cheap overnight tariff in winter and from solar the rest of the year, so the heat pump rarely draws grid power at peak rates.

A hot water diverter sends any midday surplus into the cylinder before it goes to the grid.

  • 28 × 430 W panels across the house and garage roofs
  • 10 kW hybrid inverter
  • 13.5 kWh battery with time-of-use scheduling
  • Solar hot water diverter

The result

Over its first winter the household's combined heating and electricity cost was 41% lower than the previous year's oil plus electricity, and from March to October the house ran almost entirely off its own generation.

Across the full year the system generated 10,900 kWh, the battery cycled 310 times, and the family's annual energy spend fell from £3,860 to £1,240.

We were nervous about going all-electric. The first winter bill arrived and we actually laughed

Erik Lindqvist
Erik Lindqvist
Homeowner, Sevenoaks • 12 kW + 13.5 kWh battery
Solar panels on a timber house roof above green hills

The right way,
every time.

Our accreditations aren’t just badges on a page. They’re proof that our work meets recognised industry standards, from the products we install to the way every system is designed, fitted and maintained.

MCS Certified and APHC accreditation marks